XCT Laboratory Diaphragm Jig

XCT Laboratory Diaphragm Jig is gravity concentration, which makes layer separations of ore grain mixture with mineral difference in weight based on variation of speed for the resolution of different specific weight of ores deposited in the medium. The product is from the only manufacturer that has designated by the former Ministry of Geology and Mineral Resources, in accordance with industry standards.

XCT Laboratory Diaphragm Jig is suitable for research in the laboratories of ferrous and non-ferrous metals, chemicals, Shaking Table, building materials and other industries.

Model	Uite	XCT100×150	XCT200×300
Length	mm	150	300
Width	mm	100	200
Jig chamber	(Piece)	2	2
Area	m2	0.03	0.06
Stroke	mm	<=20	<=32
Feed size	mm	<=3	≤6
Times of stroke	1/min	420	346
Capacity	kg/h	20-70	<=700
Water consumption	L/S	0.117	0.117
Water consumption	L/S	0.10	0.10
Power	kw	0.4	0.75
Overall dimensions	mm	752×520×1312	1110×520×1312
Weight	kg	150	175

Technical Parameters of Laboratory Sealed Sampling Crusher

Laboratory Sealed Sampling Crusher is used to crush materials and prepare samples with no pollution in the laboratories of the Institute in the trade of geology, Gold Mining Machine, metallurgy, coal, chemical and  building materials so on. The unit contains an automatic dust remover.

CGJ, CGF Model Series Sealed Sampling Crusher laboratory acceptance compact earthen bowl loosening proof device that is lightweight and reliable. With full fairing and no dust spillover, it requires no air exhausting and dust removal. It features high frequency vibration grinding, high crushing efficiency and uniform particle size, no mixing of samples and no need of screening and contraction. Customers can use the various types of products made on the basis of the sample volume. The product is small in volume and compact in structure, without requiring the installation as well as lower noise <60 dB. It may be ready for use at any location.

Loosen, easy operation in the whole process CGJ, CGF Model Series Sealed Sampling Crusher laboratory can be operated with a single tap of a finger for the completion of the compression crushing for sample preparation.

GJE, F77E Sealed Electrical Laboratory Sampling Crusher is the latest electric compaction device. The product is adaptive to the performance of multi-direction movement and changes the usual manual compaction mode. It is in sealing performance, light in weight desirable personal and for the first time in China.

Sealed sampling crusher

Model		Model	Uite	GJ1×150  GJ1×300  GJ1×400	GJ2×150  GJ2×300	GJ3×150  GJ3×300	GJ4×150	GJ5×150	GJ6×150
Feed size		Feed size	mm	≤5	≤5	≤5	≤5	≤5	≤5
Output size		Output size	(orders )	≤240	≤240	≤240	≤240	≤240	≤240
Crushing time		Crushing time	min	1-3	1-3	1-3	1-3	1-3	1-3
Capacity		Capacity	g	1×150  1×300  1×400	2×150  2×300	3×150  3×300	4×150	5×150	6×150
Sampling number		Sampling number	(a )	1	2	3	4	5	6
Power		Power	kw/v	1.1/380	1.1/380	1.1/380	1.5/380	1.5/380	1.5/380
Overall dimensions		Overall dimensions	mm	710×550×960
Weight		Weight	kg	135  140  155	148  160	155  175	168	180	200

Sealed sampling crusher

Model	Cups umbe	Feed size	Capacity	Crusher time	Output size	Power
	（个）	mm	g/ Each port	min	（目）	kw
CGJ100-1	1	<13	100×1	<2	≤200	1.1
CGJ100-2	2	<13	100×2	<2	≤200	1.1
CGJ100-3	3	<13	100×3	<2	≤200	1.5
CGJ100-4	4	<13	100×4	<3	≤200	1.5
CGJ100-5	5	<13	100×5	<3	≤200	1.5
CGJ100-7	7	<13	100×7	<3	≤200	1.5
CGJ200-1	1	<20	200×1	<3	≤200	1.5
CGJ200-2	2	<20	200×2	<3	≤200	1.5
CGJ200-3	3	<20	200×3	<3	≤200	1.5
CGJ200-4	4	<20	200×4	<3	≤200	1.5
CGJ400-1	1	<26	400×1	<3	≤200	1.5
CGJ400-2	2	<26	400×2	<3	≤200	1.5
CGJ400-3	3	<26	400×3	<3	≤200	1.5
CGJ400-4	4	<26	400×4	<3	≤200	1.5
CGJ500-1	1	<26	500×1	<3	≤200	1.5
CGJ1000-1	1	<26	1000×1	<3	≤200	1.5
CGJ(100/200)-Ⅰ	System respectively	<13/<20	100/200	<2	≤200	1.5
CGJ(300/400)-Ⅱ	System respectively	<23/26	300/400	<2	≤200	1.5
CGF77-1	1	<16	150×1	<2	≤200	1.1
CGF77-2	2	<16	150×2	<2	≤200	1.1
CGF77-3	3	<16	150×3	<2	≤200	1.5
CGF77-4	4	<16	150×4	<3	≤200	1.5
CGF77-5	5	<16	150×5	<3	≤200	1.5
CGF77-7	7	<16	150×7	<3	≤200	1.5

Sealed sampling crusher
Model	Cups numbe	Feed size	Capacity	Crusher time	Output size	Power
	（个）	mm	g/ Each port	min	（目）	kw
CGJE100-1	1	<13	100×1	<2	≤200	1.1
CGJE100-2	2	<13	100×2	<2	≤200	1.1
CGJE100-3	3	<13	100×3	<2	≤200	1.5
CGJE100-4	4	<13	100×4	<3	≤200	1.5
CGJE100-5	5	<13	100×5	<3	≤200	1.5
CGJE100-7	7	<13	100×7	<3	≤200	1.5
CGJE200-1	1	<20	200×1	<3	≤200	1.5
CGJE200-2	2	<20	200×2	<3	≤200	1.5
CGJE200-3	3	<20	200×3	<3	≤200	1.5
CGJE200-4	4	<20	200×4	<3	≤200	1.5
CGJE400-1	1	<26	400×1	<3	≤200	1.5
CGJE400-2	2	<26	400×2	<3	≤200	1.5
CGJE400-3	3	<26	400×3	<3	≤200	1.5
CGJE400-4	4	<26	400×4	<3	≤200	1.5
CGJE500-1	1	<26	500×1	<3	≤200	1.5
CGJE1000-1	1	<26	1000×1	<3	≤200	1.5
CGF77E-1	1	<16	150×1	<2	≤200	1.1
CGF77E-2	2	<16	150×2	<2	≤200	1.1
CGF77E-3	3	<16	150×3	<2	≤200	1.5
CGF77E-4	4	<16	150×4	<3	≤200	1.5
CGF77E-5	5	<16	150×5	<3	≤200	1.5
CGF77E-7	7	<16	150×7	<3	≤200	1.5

Lab flotation introduction and application

Introduction XFD Laboratory flotation machine:

XFD Series Single Flotation Cell is provided smaller samples in labs of geological, metallurgical, chemical and other industries available for the flotation of ore.

The application of the XFD flotation machine:

Laboratory XFD Series Single grooves flotation machine is with geology, Gold mining, building materials, chemical industry and many other industries. What kind obtain the necessary minerals for laboratory floaters small sample of ore.

Parameter of lab flotation machines

Model	Volume	Impeller Diameter	Impeller speed	Scraper speed	Feed size	motor power	Weight
	L	mm	r/min	r/min	mm	w	kg
XFD 0.5	0.5	Φ45	2130-2590	15、30	≤0.2	90	30
XFD0.75	0.75	Φ45	2130-2590	15、30	≤0.2	90	30
XFD1	1	Φ55	1700-2100	15、30	≤0.2	90	31
XFD1.5	1.5	Φ60	1590-1910	15、30	≤0.2	90	33
XFD2	2	Φ65	1590-1910	15、30	≤0.2	90	35
XFD3	3	Φ70	1544-1890	7.9、19.1	≤0.2	250	50
XFD5	5	Φ73	1544-1890	8.6、12.9、17.2	≤0.2	250	58
XFD7	7	Φ100	1400	8.6、12.9、17.2	≤0.2	250	70
XFD8	8	Φ100	1400	8.6、12.9、17.2	≤0.2	250	72
XFD12	12	Φ130	700-1100	26、20	≤0.2	370	80

Technical parameters of the laboratory Wet Drum Magnetic Separator low-intensity

Laboratory Magnetic separator XCRS is mainly used for laboratory for metallic mineral processing. It leads at the same time, the magnetic separation of the fine-grained ores with strong magnetism by the use of wet- method. It is a small volume, light in weight, easy in operation and maintenance convenient. However, it is not suitable to be used with corrosive alkalis trials in preparation. The product is indicated by the only company of the former Ministry of Geology and Mineral Resources, manufactured in accordance with industry standards.

Drum Magnetic Separator is with an open magnetic system in its rotary drum quickly separate magnetic minerals absorbed by the magnetic force on the surface of the drum and threw mud in motion by a magnetic force, before it is washed out of the separator with the provided means of the rotation of the drum surface.

XCQS wet magnetic separator is composed of two parts, the main body power supply and the drum. The main part of Magnettrennumfasst essentially: (1) frame (2) magnetic drum ( 3) ore tank (4) spray tube ( 5) transmission ( 6) feed tank.

The drum power supply has a separate silicon bridge rectifier Targeted voltage source whose output is adjusted by the handle of the voltage regulator.

First Frame: The frame is welded by angle iron. It is the supporting part of the whole Gold Mining Machine.

Second Magnetic drum: four excitation coils and magnetic cores within the magnetic drum installed. In addition, an inter- pole without exciting coil on the side of the magnetic drum is installed along which the ore is discharged in order to facilitate the discharge of ore. These form a sector and fastened on the mandrel. The mandrel is mounted on the frame by bearing bush. The drum is made ​​of a nonmagnetic aluminum and stainless steel. The combination of sector coil causes the alternation of the magnetic field polarity at each magnetic pole palm. The grains of ore rotate 180 ° each time a magnetic pole goes. Under the action of the magnetic stirring, the quality of the magnetic products can be improved. At one end of the mandrel is square extension structure that can be pulled by hand to rotate the magnetic poles axially in the magnetic drum, causing it to meet the requirements for the sorting of different types of ore.

3rd Transfer device: The transfer device is installed on one side of the bottom of the frame. In order to lower the center of gravity of the machine, the transmission part of three-phase AC motor, worm gear and worm gear is there. The output of the transmission is transferred to the magnetic drum by chains to ( not rotate the magnetic pole ), the rotation of the magnetic drum to drive. The magnetic drum is rotated at a constant speed of 25 rev / min. The direction of rotary force of the magnetic drum is consistent with the direction of ore feeding.

4th food container

The feed tank is welded through aluminum and stainless steel plate. It is attached to the frame with screws. An overflow mouth to keep the liquid level is lined on the side of the feed container, along the ores are set. Concentrate feeding mouth can be received at the bottom of the concentrate discharge tank ores.

5th spray tube

A copper pipe with hole installed on the frame is connected to the indoor water source and is used to wash the concentrate on the magnetic drum. The spray angle can be adjusted by the rotation of the spray pipe.

6th Ore field

7th Feed Tank

The feed tank is welded by stainless steel plate which is used to ensure the homogeneity during material feeding.

Belt conveyor idler frame Structural and description

Belt conveyor idler frame product description

Frame is to provide for a minimum gap between the rolls and additional protection to the conveyor belt. Frame outer slopers are designed to prevent material build around the shell end causing premature wear to avoid shell by jamming role.

Base frame cross members for optimum power to weight ratio, while designed to provide adequate support to the role under load conditions. All frames are inspected to confirm the accuracy of the main dimensions before the start of the weld run. Selected images will be removed subject of the productions at intervals and the full dimension checks and welding quality control.

Wet permanent magnetic drum separator in our factory - Jiangxi Shicheng Mine Machinery Factory

wet magnetic separator Description:

Magnetic separate magnetic materials from non-magnetic materials by the difference of the magnetic mineral coefficients and the magnet system and the mechanical machine drive. It widely used in the separation processing of ferrous metals and magnetic materials.

application

1. Used for pre-concentration in the magnetic separation mill, remove the waste stones from the ore and restore grade.

2. Will recover for the stope ore from the tailings and increase the utilization of iron ore resources.

3. Used for iron and steel factories. Handle the discarded steel slag and scale to recover the iron.

4. Used for waste treatment. Recover the useful metals and improve the quality of the environment.

Working principle:

If the starting materials in the tank body of the wet drum magnetic separator flow, firstly is the same as the direction of rotation magnetic drum, the flow direction of the raw materials, the magnetite iron materials are attracted to the surface of the drum. This is the first separation. in the second step, the raw materials will be back for the second release. this time, the flow direction of the raw materials is the washing water under flush with respect to the magnetic drum direction of rotation. then along with the rotation of the drum, the iron magnetite materials on the surface of the drum are finally leave the magnetic field and are incident on the field of ore concentrate under gravity. also the rinse water above helps to empty the iron in magnetite ore concentrate box. the weak magnetic and non-magnetic materials are not applied and to the discharge pipe for the tailings flow.

Gold Mining Machine - Sluice box mat

Sluice box mat description

Use sluice mat in the sluice box to catch the gold granules. It has been widely used in alluvial Gold Mining Machine, and sometimes it is used for alluvial tin or coltan recovery.

Our sluice mat made ​​by Japan technology, with a very good quality and also with an extremely high recovery effect than the traditional mat. Enter a high economic benefite for the user.

Types of sluice mat

There are three types of sluice mat: fine matt, meddium and rough mat.