Belt conveyor idler frame Structural and description

Belt conveyor idler frame product description

Frame is to provide for a minimum gap between the rolls and additional protection to the conveyor belt. Frame outer slopers are designed to prevent material build around the shell end causing premature wear to avoid shell by jamming role.

Base frame cross members for optimum power to weight ratio, while designed to provide adequate support to the role under load conditions. All frames are inspected to confirm the accuracy of the main dimensions before the start of the weld run. Selected images will be removed subject of the productions at intervals and the full dimension checks and welding quality control.

Wet permanent magnetic drum separator in our factory - Jiangxi Shicheng Mine Machinery Factory

wet magnetic separator Description:

Magnetic separate magnetic materials from non-magnetic materials by the difference of the magnetic mineral coefficients and the magnet system and the mechanical machine drive. It widely used in the separation processing of ferrous metals and magnetic materials.

application

1. Used for pre-concentration in the magnetic separation mill, remove the waste stones from the ore and restore grade.

2. Will recover for the stope ore from the tailings and increase the utilization of iron ore resources.

3. Used for iron and steel factories. Handle the discarded steel slag and scale to recover the iron.

4. Used for waste treatment. Recover the useful metals and improve the quality of the environment.

Working principle:

If the starting materials in the tank body of the wet drum magnetic separator flow, firstly is the same as the direction of rotation magnetic drum, the flow direction of the raw materials, the magnetite iron materials are attracted to the surface of the drum. This is the first separation. in the second step, the raw materials will be back for the second release. this time, the flow direction of the raw materials is the washing water under flush with respect to the magnetic drum direction of rotation. then along with the rotation of the drum, the iron magnetite materials on the surface of the drum are finally leave the magnetic field and are incident on the field of ore concentrate under gravity. also the rinse water above helps to empty the iron in magnetite ore concentrate box. the weak magnetic and non-magnetic materials are not applied and to the discharge pipe for the tailings flow.

Gold Mining Machine - Sluice box mat

Sluice box mat description

Use sluice mat in the sluice box to catch the gold granules. It has been widely used in alluvial Gold Mining Machine, and sometimes it is used for alluvial tin or coltan recovery.

Our sluice mat made ​​by Japan technology, with a very good quality and also with an extremely high recovery effect than the traditional mat. Enter a high economic benefite for the user.

Types of sluice mat

There are three types of sluice mat: fine matt, meddium and rough mat.

Gold pan for gold panning a traditional tool

Description

The Gold panning pan is a traditional gold panning tool that has been widely used in alluvial gold mining and gold exploration. As it is easy to carry, easy to use, it is an important tool for Gold Mining Plant. And also, has this pan for other alluvial mineral mining such as columbite / coltan, tin, diamonds and etc.

Types and models

We get the traditional gold pan, which is made by wood, and there are three models of this wood ladle: small, middium and size. We design and manufacutred murder plastic gold pan, which one is lighter, stronger, more efficient than the wood.

Fluctuate sluice box / pulsating sluice box / vibrating sluice box

description

The sluice box vacillation is also used as a wash trough pulsating, vibrating sluice box, this machine is a new type of sluice box, which is by a Chinese engineer inovated, and it is widely used in the gold concentration to replace the traditional sluice box.

application

These fluctuating lock machine is used to focus in Gold Mining Equipment, especially the alluvial gold

Recovery and recycling taillings. And this machine could work very well with centrifugal gold concentrator.

Advantage and disadvantage

Compare with the traditional sluice box, these Fluctuating sluice box get the advantages as bellow:

First with higher recovery rate.

Second with higher concentating ratio, there are fewer gait inside the concentrate.

3rd with higher efficiency

4th efficient for the sheet shape gold concentrate.

5th prevent the sedimentation of the slurry.

The disadvantages of this machine compare with the traditional sluice box this machine is power from supply, and the feeding size should be limited below 7 mm.

Amalgamation machine for gold refining

description

Amalgamation machine is the traditional gold refining machine, it is widely used to mix the mercury and gold concentrate,

In order to receive the pure gold.

Our automatic amalgamator will drive new designed, engine, machine, instead of mannual to more efficient;

use to facilitate the stepper motor operation, use stainless iron tank to get a long life and save the mercury;

reasonable structure make this machine neat and clean.

application

This machine is used for mixing mercury and gold concentrate to extract the pure fine gold.

spiral classifier

This classfiers suitable for drainage, medium, drain aging amd syringes in ore clressing for medium and fine naterial wet and Trockenklassifizierungsin me.

Such Gold Mining Machine is mainly used in the production process of metal processing. According to the difference in sedimentation of mineral particles and sludge, the particle sizes of ores with 14-325 mesh are classified. Waste sludge or water for ore sand can be separated from the ores.

Such machines are divided into individual Spiralsichterund double Spiral classifier. In addition, they are also divided into high weir spiral classifier and underwater spiral classifiers. If the overflow edge is higher than the center line of the spiral shaft and smaller than the outer diameter of the spiral at the Überlaufendeist, the spiral classifiers those high weir. If the overflow edge is higher than the center line of the spiral shaft and greater than the outer diameter of the spiral at the overflow end of the spiral classifiers are immersed ones. High weir classifiers are usually used for the classification with a particle size of less than 100 mesh. Submerged classifiers are typically used for classification with particle size less than 200 mesh.

Model	Spiral Dia.	Spiral Speed	Output		Motor Power		Weight
			Circulating Load	Overflow Quantity	Lift Lower	Drive
	mm	r/min	t/24h	t/24h	kw	kw	t
High-weir single spiral classifier
FG-3	Φ300	8.3-2.2	30-80	10-30	2.2	1.1	0.67
FG-5	Φ500	8.5-15.5	143-261	32	2.2	1.1	1.6
FG-7	Φ750	4.5-9.9	256-564	65	2.2	3	2.83
FG-10	Φ1000	3.5-7.6	473-1026	85	2.2	5.5	4
FG-12	Φ1200	5、6、7	1170-1600	155	2.2	5.5	8.54
FG-15	Φ1500	2.5、4、6	1140-2740	235	2.2	7.5	11.68
FG-20	Φ2000	3.6、5.5	3890-5940	400	3	11、15	20.45
FG-24	Φ2400	3.64	6800	580	3	15	25.65
FG-30	Φ3000	3.2	11650	893	4	22	40.9
High-weir double spirals classifier
2FG-12	Φ1200	5、6、7	2340-3200	310	2.2×2	5.5×2	15.84
2FG-15	Φ1500	2.5、4、6	2280-5480	470	2.2×2	7.5×2	21.11
2FG-20	Φ2000	3.6、5.45	7780-11880	800	3×2	22、30	36.34
2FG-24	Φ2400	3.67	13600	1160	3×2	30	53.49
2FG-30	Φ3000	3.2	23300	1785	4×2	40	73.03
Submerged single spiral classifier
FC-12	Φ1200	2.5、4、6	1170-1630	120	2.2	7.5	11.1
FC-15	Φ1500	2.5、4、6	1140-2740	185	2.2	7.5	15.32
FC-20	Φ2000	3.6、5.5	3890-5940	320	3	11、15	29.056
FC-24	Φ2400	3.64	6800	455	4	18.5	37.267
FC-30	Φ3000	3.2	11650	705	4	22	46.2
Submerged double spiral classifier
2FC-12	Φ1200	3.8、6	1770-2800	240	2.2×2	7.5×2	19.61
2FC-15	Φ1500	2.5、4、6	2280-5480	370	2.2×2	7.5×2	27.45
2FC-20	Φ2000	3.6、5.5	7780-11880	640	3×2	22;30	50
2FC-24	Φ2400	3.67	13700	910	3×2	30	53.491
2FC-24	Φ2400	3.67	13700	910	4×2	37	65.283
2FC-30	Φ3000	3.2	23300	1410	4×2	45	84.87